System Components & Accessories

Product	Part Number	Description	Material	Thread Size - ID/OD	Operating Pressure	Max Pressure	Operating Temp.
	200121	EOL- End of Line Adaptor with Pressure Gauge	High grade Brass Nickle chrome plated	1/8" BSP	0 -25 Bar	60 Bar	-50^oC to +150^oC
	AutoFireX® EOL are designed to be compatible with the following systems and devices: DLP Systems with Low-Pressure Fire suppression agents (FK-5-1-12, HFC227ea, FE36, Dry Powders, Foams) ILP Systems with all Low-Pressure Fire suppression agents (FK5-1-12, HFC227ea, FE36, Dry Powders, Foam, wet chemicals, water) Heat/Fire Detection tube - 6mm dia. Adaptable outlet Port for connecting adaptor for recharge/ commissioning and system monitoring.
	100127	Pressure Gauge Generic	High grade Brass Nickle chrome (CuZn39) plated NBR - 70 Shore A black	M10x1 - 1/8 " NPT - 8mm long.	0 -28 Bar	28 Bar	-50^oC to +150^oC
	AutoFireX® Pressure Gauge are specifically designed to monitor and indicate system pressure and meet the requirements of EN3-7. They are compatible to be used with the following systems:DLP Systems & valves with Low-Pressure Fire suppression agents (FK-5-1-12, HFC227ea, FE36, Dry Powders, Foams) ILP Systems & Valves with all Low-Pressure Fire suppression agents (FK5-1-12, HFC227ea, FE36, Dry Powders, Foam, wet chemicals, water) End of Line Adaptors -EOL, Manual Actuators for recharge/ commissioning and system monitoring.
	100178	Isolation Ball Valve	Chrome Nickel-plated Brass Body with PTFE Seats,	G 1/8"	-0.99 - 20 Bar	25 Bar	-20^oC - +80^oC
	Next Gen AutoFireX® Isolation Ball Valve is utilised for all operation/ isolation/filling/ pressurising and recharging on all DLP/ILP Valves.
	200110	Manual Actuator with Pressure Gauge	High Grade Brass		0.5-20 Bar	28 Bar	-20^oC to +60^oC
	The Manual Actuator is used for actuation of the ILP or IHP system for all types of fire suppression agents through manual intervention. This device is designed to allow for initial charging, and commissioning, and has a pressure gauge to enable system pressure checks and a replaceable copper burst disc. It also has an internal Schrader valve that allows safe removal of gauges and charging adaptors.
	100131	NOZZLES Clean Agent Discharge Nozzle Spray Angle <90o Discharge Range <1.5M	High Grade Brass	¼” BSPT	0.5-20 Bar	30 Bar	-50^oC to +150^oC
	100135	NOZZLES Clean Agent Discharge Nozzle Spray Angle <60o Discharge Range <2.0M	High Grade Brass-Nickle coated /SS303	¼” BSPT	0.5-20 Bar	30 Bar	-50^oC to +150^oC
	AutoFireX® Clean Agent Discharge nozzles are specially designed for discharge of Low-pressure Clean fire suppression agents like FK-5-1-12, HFC227ea, FE36 etc. when utilised with AutoFireX Fire suppression Systems and come in two patterns for various applications. These nozzles are made from High grade Brass and are nickel chromium coated for enhanced life and performance. All Nozzles are supplied with Blow Off Silicone caps to prevent ingress of environmental contaminants, debris etc
	100133	NOZZLES Dry Chemical Powder Discharge Nozzle Spray Angle <60o Discharge Range <2.0M	High Grade Brass-Nickle coated /SS303	3/8” BSPT	0.5-20 Bar	30 Bar	-50^oC to +150^oC
	100134	NOZZLES Dry Chemical Powder Discharge Nozzle Spray Angle <60o Discharge Range <2.0M	High Grade Brass-Nickle coated /SS303	3/8” BSPT	0.5-20 Bar	30 Bar	-50^oC to +150^oC
	AutoFireX® DCP Discharge nozzles are specially designed for discharge of fire suppression agents - ABC, BC, D type Dry Chemical Powders and come in two patterns for various applications. These nozzles are made from High grade Brass and are nickel chromium coated for enhanced life and performance. All Nozzles are supplied with Blow Off Silicone caps to prevent ingress of environmental contaminants, debris etc.
	100168	NOZZLES Foam Discharge Nozzle Discharge Range <2.0M	High Grade Brass-Nickle coated /SS303	3/8” BSPT	0.5-20 Bar	30 Bar	-50^oC to +150^oC
	AutoFireX® Foam Discharge nozzles are specially designed for discharge of fire suppression agents – AFFF, K Foam & Wet Chemical Agents and come in three patterns (A,F & R) for Kitchen Fire suppression systems and various other applications. These nozzles are made from High grade Brass and are nickel chromium coated for enhanced life and performance. All Nozzles are supplied with Blow Off Silicone caps to prevent ingress of environmental contaminants, debris etc.
	100174	Safety Lock (For Isolation Valve)	Stainless Steel SS303	8mm Ø	20 Bar	25 Bar	-50^oC to +150^oC
	100163	Blow off Cap AutoFireX® Nozzle Blow off Cap	High Quality Silicone	12mm Ø	20 Bar	25 Bar	-50^oC to +150^oC
	AutoFireX® Nozzle Blow off Cap – is made of high-quality silicone for use in harsh environments. They are designed to fit the specific nozzles to protect against ingress of dust, water or debris and prevent blocking of the nozzle orifices. On discharge, due to pressure of the agent, the cap blows off the face of the nozzle allowing the dispersion of the agent effectively
		Component Bracket	High grade MS	60 x 60mm (L x H)
	AutoFireX® Component Bracket with multiple secure points are specially designed for quick and easy fixing of discharge nozzles, EOL, various bulk heads, Pressure switch etc for various applications. These nozzles are made from High grade MS are powder coated for enhanced life and performance